Craft fence nets, also called zinc steel fences, are mainly used for isolation of villas and fences of factories.
Common specifications of craft fence net
1. Craft Fence Mesh-Economical Type: Horizontal Pipe: 32 * 32 * 1.2mm Vertical Pipe: 16 * 16 * 1.0mm Post: 50 * 50 * 1.5mm
2. Craft Fence Mesh-Standard Type: Horizontal Pipe: 40 * 40 * 1.2mm Vertical Pipe: 19 * 19 * 1.0mm Column: 60 * 60 * 1.5mm
The height of the craft fence is generally not more than two meters, and most of it is used outside the factory area and residential villas. Common heights are 1.2 meters, 1.5 meters, 1.8 meters, and 2.0 meters.
The main column of the process fence net is connected to the vertical beam and square tube of the beam as an assembled connection without welding. The connection between the mesh plate and the column adopts round head square neck bolts, anti-theft washers and screws to provide reliable safety protection for your factory. High quality, because it is a detachable assembly structure, it can also be removed and moved when necessary, and reinstalled, which is not possible with traditional fences.
Electrostatic spraying assembly fence Electrostatic spraying fence, the base material is hot-dip galvanized steel pipe, which plays the role of electrochemical protection, from the inside to the outside to prevent the rust of the steel base material, the surface electrostatic spraying, so that the fence products have good self-cleaning performance. It has the longest service life, and can be used repeatedly. Good decoration, rich colors, and colors can be freely matched to meet your individual needs. One-time investment. No maintenance is required during use. The service life is more than 15 years.
Craft fence nets are mainly used around villas, small squares, garden villas, gardens, tourist attractions, etc. This kind of fence net can be installed, and columns can be installed on the cement floor by flange expansion screws. You can also embed the pillars 30cm in length directly in the ground. The two installation methods are determined according to the actual ground environment of the installation.